Cisco 12010 series Maintenance Manual page 59

Chapter 7 Maintaining the Router
Figure 7-31 Connecting the DC Power Cables—2800 W PDU
Step 13
OL-11496-01
Replace the clear plastic safety covers over the PDUs and tighten the screws (see
Figure 7-29).
Be sure to use the correct safety cover after you have replaced a PDU.
Note
Safety covers for 2400 W PDUs are a 1-piece design as shown in
Figure 7-29; safety covers for 2800 W PDUs use an upper and lower,
2-piece design.
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Removing and Replacing AC and DC Power Subsystem Components
7-59