Cisco 12010 series Maintenance Manual page 29

Chapter 7 Maintaining the Router
Table 7-1 Original and Replacement Components
Original Components
AC Power Distribution Unit (PDU)
(GSR10-AC-PDU=)
Compatible only with original, 2400 W AC
power supplies.
AC PEM (PWR-GSR10-AC=)
Used to replace original, 2400 W power
supplies only. All power supplies must be
2400 W. Do not mix with new, 2800 watt
power supplies.
The power supplies
Note
PWR-GSR10AC,
PWR-GSR10-AC= do not
electrically store unit detials like
serial number, firmware version,
and part number. Hence, the
software is unable to display serial
number, firmware version, and part
number details for these power
supplies.
OL-11496-01
Replacement Component
AC Power Distribution Unit (PDU) (GSR10-AC-PDU-B=)
Required for new, 2800 W AC power supplies.
AC PEM (PWR-GSR10-AC-B=)
Used to replace existing power supplies. All power
supplies must be 2800 W. Do not mix with old, 2400 W
power supplies.
If you are upgrading 2400 W power supplies to new,
2800 W power supplies, you must also upgrade to new
AC PDU (PWR-GSR10-AC-B=).
Note
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Removing and Replacing AC and DC Power Subsystem Components
This enhanced power supply can read and
display serial number, firmware version, and part
number details of the units as they can
electronically store this information.
7-29