INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
INSTALLATION PROCEDURE FOR OPTIONAL
EQUIPMENT
1. Turn the printer power off and disconnect the power cord before installing an optional
equipment.
2. Be careful not to pinch your fingers or hands with the covers.
3. Be careful not to injure your fingers when installing the cutter module.
1. Cutter Module: B-SX208-QM-R
B-SX208-QM-R is an optional cutter module for the B-SX6T/SX8T Series.
•
Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
Cutter Unit (1 pc.)
Cutter Attaching
Screw (2 pcs.)
Note: for how to use the print head cleaner, please refer to the Owner's Manual.
•
Installation Procedure
1.
Turn the power off.
2.
Open the right side cover and top covers.
Cutter Harness (1 pc.)
Cutter Module Cover
(1 pcs.)
FL-4x6 Screw (2 pcs.)
SM4x6 Screw (1 pc.)
WARNING!
Cutter Support Plate
(1 pc.)
Installation Manual
(1 copy)
1- 1
EO15-33002
1. Cutter Module: B-SX208-QM-R
Print Head Cleaner
(1 pc.)
Top Cover
Right Side Cover