2) Press Menu soft key->3.Settings->2.Advanced
3) You are prompted to enter the required password.
4) Scroll to Set Password option, then press OK button.
5) You are prompted to enter the Current PWD, New PWD and Confirm PWD.
6) Press OK button to confirm the change, or Back soft key to return to previous
menu.
To change the administrator password via Web interface:
Go to Security -> Password
Reboot
You should reboot the phone when you are asked to, e.g. after applying specific
changes to phone configuration.
To reboot via Web interface:
1) Go to System -> Upgrade.
2) Click Reboot button.
Note:
Please do not power off during reboot, or it will cause the flash memory error.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider's advice.
To reset to factory via phone interface:
1) Make sure active User Type is admin or var
2) Press Menu soft key->3.Settings->2.Advanced.
3) You are prompted to enter the required password.
4) Scroll to Reset Factory option, then press OK button.
5) You are prompted to confirm the change, press OK to reset to factory settings, or
Back soft key to return to previous menu.
- 43 -