Incoming Calls; Answering An Incoming Call; Rejecting An Incoming Call; Dnd - RCA IP120 Manual

Hook Off tmo: Timeout for the unit to go back to standby mode after hook off
Hook Off tmo Enable: To enable/disable the Hook Off tmo.

Incoming calls

Answering an incoming call

1) Lift the handset or press
press Headset
2) If you are already talking on the phone, press the corresponding line key or OK
button to answer the new call.
During the conversation, you can alternate between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.

Rejecting an incoming call

Press the Mute/Cancel

DND

When DND function is enabled, all the incoming calls will be rejected and the display
shows icon; you can find the incoming call record in the Call History.
If you press DND soft key in idle mode, you activate or deactivate the DND function.
To configure the DND function via Phone interface:
1) Go to Menu soft key ->2.Features->7.DND to enter the configuration interface.
2) Use the right or left navigation keys to choose Enable/Disable.
3) Press the OK button to save the changes.
4) Choose DND option again to deactivate DND mode.
You can also activate/deactivate DND function using DND Codes if your IPPBX or server
provides this function:
1) Go to MENU->2.Features->7.DND to enter the configuration interface.
2) Set the DND On Code and the DND Off Code by pressing up or down navigation
keys, then press the OK button to save the changes.
3) When you select to enable/disable the DND function on the phone, it will send these
Speaker
button to answer using the headset.
key to reject an incoming call directly.
button to answer using the speakerphone, or
- 33 -