Assembly Step - Horizon Fitness EVOLVE 5 Assembly Manual

ASSEMBLY STEP 1

1
6
HZ14_AG_Evolve_3_5_Rev1_1.indd 6-7
A Remove the PRE-INSTALLED BOLTS AND
WASHERS (1) from the MAIN FRAME (2).
B Attach the CONSOLE CABLES (3) and tuck them
into the MAIN FRAME (2).
C Attach CONSOLE MAST (4) to MAIN FRAME (2)
using PRE-INSTALLED BOLTS AND
WASHERS (1).
NOTE: Be careful not to pinch any wires
while attaching the console mast.
4
3
2
ASSEMBLY STEP 2
5
4 A C
B E
HARDWARE FOR STEP 2
PART TYPE
A RUBBER WASHER
B FLAT WASHER
C FLAT WASHER
D SPRING WASHER
E BUTTON HEAD BOLT
D
A Open HARDWARE FOR STEP 2.
B Slide 1 RUBBER WASHER (A) and 1 FLAT
WASHER (B) onto the CONSOLE MAST (4).
C Slide HANDLEBAR (5) onto CONSOLE MAST (4)
and attach using 1 FLAT WASHER (B),
1 FLAT WASHER (C), 1 SPRING WASHER (D)
and 1 BOLT (E).
6
D Snap 1 HANDLEBAR CAP (6) onto
HANDLEBAR (5).
E Repeat steps B–D on the other side.
QTY
2
4
2
2
2
7
7/31/14 9:01 AM