Hardware Configuration - 3Com 5500G Getting Started Manual

12 Chapter 2: OSN|M Hardware Overview
Hardware
Configuration
c
USB interface
Use the USB interface on the OSN|M's front panel to connect a storage
medium such as a USB flash disk to perform file related operations. Refer
to Table 4 for the USB interface specifications.
Table 4 USB interface specifications
Specification
Connector type
Number of connectors
Interface standard
Transmit rate
Working mode
Table 5 describes the hardware components of the OSN|M.
Table 5 OSN|M hardware configuration
Specification
CPU
Memory
Hard disk
CAUTION: Do not replace OSN|M hardware components yourself. Doing
so can damage the module.
Table 6 describes the hard disk's default partitioning.
Table 6 Default partitioning of the OSN|M hard disk
Partition Mount
name point
/dev/hda1 /
Description
USB interface
1
USB 2.0 (backward compatible)
low-speed mode: 1.5 Mbps
■
full-speed mode: 12 Mbps
■
high-speed mode: 480 Mbps
■
Half duplex
■
Host mode
■
Description
Celeron M1.0G 373 processor
512 M
80 G
Format of
file system Function
ext3 The Linux root file system. When you
choose to boot from the hard disk using
Elilo, it uses this partition as the system's
root file system. The volume label of this
partition is /.