Samsung VP-D10 Service Manual page 45

Adjustment and Adjustmentt
3-4. EVF Adjustment
3-4-1. EVF adjustment Preparation
STEP 1
1) Connect the power source
(battery/DC cable).
2) Set the "POWER(CAMERA/PLAY-
ER)" switch to "CAMERA" position.
LCD
01 MODE 1
EPR:XX EVR:XX
Monitor screen
Note : "XX" indicates variable values.
3-4-2. EVF adjustment
1) VIDEO GAIN
a) Connect an oscilloscope probe to
TP-V.
b) Adjust the VRE02 so that A level is
2.5 Vp-p
3-32
STEP 2
Press and hold the "EDIT(+)" button
and "SELFTIMER" button on the
video camera at the same time for
more than 5 seconds.
STEP 3
Press the "DISPLY" button to make color bar
appear.
Remote Control Button Location
10 PIN CON.
2 PIN CON.
VR
Location of Test Point
Samsung Electronics