Samsung VP-D10 Service Manual page 37

Adjustment and Adjustmentt
3-2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value. Press the START/STOP (Confirm)
button to store the adjusted value.
16D
(Adjusted va l u e ) (Stored va l u e )
1. LENS ZOOM TRACK
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on
the location of zoom lens. During adjusting, micom measures the focus location from a near dis-
tance to a long.
1) Camera is set to E-E mode.
2) Focus chart photo (the last page of manual)
3) Ensure that camera is left an about 2.5 m distance from a focus chart and the focus of lens is placed verti-
cally. Attach a focus chart to white or gray wall of a flat surface.
4) Connect a video output terminal to a TV.
5) Press the FF(Mode Up)/REW(Mode Down) button so that OSD shows "260 XX XX".
6) Press the START/STOP (Confirm) button. Never impact on the lens when adjusting zoom and focus lens.
There's is a flicker on screen after finishing the adjustment.
3-24
XX XX
2.5m +/-1Cm
Samsung Electronics