Punch-Through - Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM Owner's Manual

15-1919.fm Page 16 Monday, July 19, 1999 12:34 PM
Note: If you normally press
a channel number, you must also include
in your sequence.
4. To store the sequence, press and hold down
until the red indicator light blinks twice.
UP
Whenever you press the selected sequence key (
or ), your system's remote control
DIO SEQ VIDEO SEQ
sends the sequence of commands you entered.
To erase a sequence, press the device key, then hold
until the red indicator light blinks twice. Then
SET UP
press and the key to which the sequence is as-
9 9 5
signed ( or
AUDIO SEQ VIDEO SEQ
the red indicator blinks twice again. The sequence is
erased.

Punch-Through

The punch-through feature lets you alternately control
two different devices without pressing the device keys
for each one. Here's how it works.
The 6 in 1 RF Remote Control System's remote control
keys are not all used by every device. For example, a
TV is often the only device that uses
you press , then press
TV VCR
not used by the VCR retain their TV functions. If your
cable box or VCR has a volume control, you can turn
off the punch-through feature to allow your cable con-
verter or VCR to control the volume. If you want to con-
trol volume through your cable converter, you must be
in the cable mode. If you want to control the volume
through your VCR, you must be in the VCR mode.
For example, to turn off punch-through, with the remote
in the cable mode, press and hold
indicator blinks twice. Then press
indictor blinks twice a second time, volume is controlled
through your cable box.
To turn on punch-through for the TV, press
. When the indicator blinks twice a second time,
9 3 TV
the punch-through feature has been turned back on.
Need help? Call 1-800-950-7044!
16
after entering
ENTER
ENTER
SET
AU-
). Press until
SET UP
. When
VOLUME
, the functions of any keys
until the red
SET UP
. When the
9 9 3 CBL
SET UP 9