Locking The Functions; Power Saver - Radio Shack TRC-232 Owner's Manual

21-1672.fm Page 26 Thursday, August 5, 1999 12:04 PM

Locking the Functions

Use the switch to lock the walkie-talkie's functions (except
LOCK
, , and ) to prevent accidental program changes.
PTT LGT H/L
Press so appears on the display. To release the
LOCK LOCK
lock, press again. LOCK disappears from the display.
LOCK

POWER SAVER

Your walkie-talkie features a special power saver circuit. If the
walkie-talkie does not receive a transmission for more than 10
seconds, the circuit sets the walkie-talkie to standby and PS
flashes on the display.
During standby, the walkie-talkie uses only 70% of the power
consumed during regular operation. The walkie-talkie returns to
normal power when it receives a transmission, when you turn
counterclockwise until you hear noise, or when you
SQUELCH
press any control or function switch.
26