Scanning Incoming Signals; Alternating Between Two Channels - Radio Shack TRC-232 Owner's Manual

21-1672.fm Page 24 Thursday, August 5, 1999 12:04 PM

Scanning Incoming Signals

To scan incoming signals, press . SCAN appears on the
SCAN
display, and the walkie-talkie stops for 5 seconds on each chan-
nel where there is a transmission. Press again to stop au-
SCAN
tomatic scanning. SCAN disappears from the display.

Alternating Between Two Channels

To alternate between two channels, select one channel and
press (dual watch). appears on the display. Using the
DW
DW UP
or channel buttons, select another channel.
DWN
24