Horizontal Scanning; Vertical Scanning; Power Input Connection; Power Management - Philips 170V7 Service Manual

17" LCD Color Monitor

3.4 Horizontal scanning

Sync polarity
Scanning frequency

3.5 Vertical scanning

Sync polarity
Scanning frequency

3.6 Power input connection

Power cord length
Power cord type

3.7 Power management

The monitor must comply with the Microsoft On Now specification, with two power management states,
as defined by the VESA DPMS document. The monitor must appropriately display the DPMS state.
Mode
Power-On
Off
DC Power Off

3.8 Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and having DDC 2B capability

3.9 USB Hub

NA

4. Visual characteristics

4.1 Test conditions

Unless otherwise specified, this specification is defined under the following conditions.
(1) Input signal: As defined in 3.3, 1280 x 1024
(2) Luminance setting: controls to be set to 200 nits with full screen 100 % duty cycle white signal
(3) Warm up: more than 30 minutes after power on with signal supplied.
(4) Ambient light: 400 -- 600 lux.
(5) Ambient temperature: 25 ± 5 °C

4.2 Brightness

>=250 nits (at panel color temperature, at center of the screen, set contrast and brightness at maximum. )

4.3 Image size

Actual display size 337.920 x 270.336mm
: Positive or Negative
: 30 – 83KHz
: Positive or Negative
: 56 – 76 Hz
: 1.8 M
: 3 leads power cord with
HSYNC VSYNC Video
On On active
Off Off blanked
non-interlaced mode ( 64 K/60Hz), signal
sources must have 75 ohm output impedance.
protective earth plug.
Pwr-cons. Indication Rec. time
< 36 W Green LED
< 1 W Amber LED
N/A < 1 W LED Off
80
170V7
--
< 3 s