Upgrading (Service Support Tool); Upgrade Functions; Backup / Restore Ram Data - Canon imagerunner advance C9075 PRO Service Manual

Canon
The Education/Training (listed in preferred order) of a successful Canon
dealership's SE include:
1. Novell CNA or Novell CNE or Microsoft MCSE certification
2. Two years of experience being a Canon Copier Service Technician
(training centered on connectivity products)
3. A degree in Computer Science or Engineering, or a computer technician
with two years of experience is required in the above areas.
G.

Upgrading (Service Support Tool)

The SST (Service Support Tool) (version 4.72 or later) is available via
Canon's e-Support Center Web site (http://www.support.cusa.canon.com) for
upgrading the following system components:
1.

Upgrade Functions:

• System Software stored on the HDD
• Main engine firmware
• Accessory firmware (Refer to the SST User Manual for a list of
• MEAP Contents
• Language
• HDD Format
• RUI (Remote User Interface) stored on the HDD
• BootROM stored on a FDIMM (Flash Double Inline Memory Module)
These imageRUNNER ADVANCE devices support firmware download from
the SST and a USB memory stick. When the hard disk drive is replaced, the
SST is used to format the new HDD and load software.
2.

Backup / Restore RAM Data

If replacing and PCBs with FDIMMs attached or initializing RAM, the
Service Support Tool can be used to create a backup file of the RAM
data on the FDIMMs and saved to a PC. Once the PCB has been
replaced, the RAM backup file can be restored to the imageRUNNER
ADVANCE and factory settings restored.
imageRUNNER ADVANCE C9000 PRO / C7000 Series Service Guide
Rev. 2
imageRUNNER ADVANCE C9000 PRO / C7000 Series Service Guide
supported devices and accessories.)
on the Main Controller PCB (Printed Circuit Board)
March 2015
Page 43