Console Panel - Hotpoint FDM550P Service Information

Indesit Company

CONSOLE PANEL

ON-OFF/RESET BUTTON
Press this button to switch the appliance on.
To Re-set a programme that requires cancelling press and hold down the On-Off button.
ON-OFF INDICATOR LAMP
This Lamp shows that the Dishwasher is Switched on.
START/PAUSE BUTTON
Once the Programme and Options required have been selected. Pushing this button once will
start the selected Programme.
During a Programme if this button is pushed the Cycle will stop until the button is pushed
again, when the cycle will continue.
START/PAUSE INDICATOR LAMP
Lamp States
1. Lamp FlashingWaiting for a Cycle to be selected
and Started
2. Lamp Green and On,Programme in progress
WASH CYCLE SELECTOR
Used to select the required Wash Programme
PROGRESS LAMPS
These lamps show the Delayed Time set, if this Option
has been selected and during a Cycle, Programme
progress.
STAND-BY
When the cycle has completed the programme, 10 minutes after the door is opened the machine will
go into stand-by. The LEDs will turn off.
Push the On/Off button to remove the machine from stand-by mode.
Service Manual UK
5 of 35
English