Operations During A Call; Phonebook Management; Selecting Phonebook Data - Sony XAV-601BT Operating Instructions Manual

Operations during a call

To adjust the talker's voice volume
Press (VOL) +/– during a call.
The level of the talker's voice volume will be
stored into memory, independently from the
regular volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch , then the required number keys.
To transfer the current call to the
cellular phone
Touch
To transfer back to the handsfree call, touch
again.
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch , then "MIC Gain."
2
Touch "Low," "Middle," or "High" to
adjust the level.
3
Touch repeatedly to return to the
previous displays.
To end a call
Touch .
38
.

Phonebook management

You can store up to 500 contacts in the
phonebook.
Notes
• Prior to disposal or changing ownership of your car
with this unit still installed, be sure to erase all the
phonebook data in this unit to prevent possible
unauthorized access, by doing any of the following:
– Delete the phonebook data by initializing
(page 41).
– Press the reset button.
– Disconnect the power supply lead.
• Downloaded phonebook data from a cellular phone
cannot be overwritten by subsequent data. However,
some data (name, etc.), may be duplicated as a
result.
• Phonebook data may be lost if this unit is damaged.

Selecting phonebook data

You can select the phonebook data of a cellular
phone, or the internal data on this unit.
1
Press (HOME), then touch "Phone."
The Bluetooth Phone display appears.
2
Touch , then "Phonebook Select."
3
Touch the desired item.
To return to the previous display, touch
Storing phonebook data (When
"Internal" has been selected from
"Phonebook Select")
You can send phonebook data from the
connected cellular phone and receive it on this
unit.
1
Press (HOME), then touch "Phone."
The Bluetooth Phone display appears.
2
Touch , then "Receive Phonebook."
This unit is ready for receiving phonebook
data.
3
Send the phonebook data by
operating the connected cellular
phone.
When receiving is complete, Bluetooth device
name appears and the phonebook data is
stored on this unit.
.