Cisco Catalyst 3850 Deployment Manual page 24

Hide thumbs Also See for Catalyst 3850:
Table of Contents

Advertisement

Use these commands to enable an evaluation license:
Switch# license right-to-use activate ipservices evaluation all acceptEULA
% switch-4:stack-mgr:Reboot the switch to invoke the highest activated License
level
Switch#
*Mar 19 00:52:42.054: %SMN_HBL_LICENSE-6-LIC_ACT: 4 stack-mgr:
license is activated successfully on switch 4
*Mar 19 00:52:42.054: %SMN_HBL_LICENSE-6-LIC_CHANGE: 4 stack-mgr:
reboot license level changed from lanbase to ipservices eval. Reboot the switch
to invoke the new license level.
After a reload:
Switch# show license right-to-use summary
License Name
-----------------------------------------------------
ipservices
apcount
apcount
-----------------------------------------------------
License Level In Use: ipbase
License Level on Reboot: ipservices eval
Evaluation AP-Count: Disabled
Total AP Count Licenses: 0
AP Count Licenses In-use: 0
AP Count Licenses Remaining: 0
Use these commands to deactivate an evaluation license:
Switch# license right-to-use deactivate ipservices evaluation all
% switch-4:stack-mgr:Reboot the switch to invoke the highest activated License
level
Switch#
*Mar 19 00:56:12.682: %SMN_HBL_LICENSE-6-LIC_EULA_CLEAR: 4 stack-mgr:
ipservices eval license has been cleared.
*Mar 19 00:56:12.683: %SMN_HBL_LICENSE-6-LIC_CHANGE: 4 stack-mgr:
reboot license level changed from ipservices eval to lanbase. Reboot the switch
to invoke the new license level.
Note:
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Type
evaluation
base
adder
You must reload the switch to activate the correct license level.
Count
Period left
N/A
90
0
Lifetime
0
Lifetime
ipservices eval
Switch 4
EULA for
Switch 4
Page 24 of 36

Advertisement

Table of Contents
loading

Table of Contents