4 ] Disassembling The Roll Guide - Brother TD-4000 Service Manual

[ 4 ] Disassembling the Roll Guide

(1) Release the two pins of the roll guide actuator to remove the roll guide actuator
from the roll guide.
(2) Remove the roll guide spring A from the roll guide actuator.
(3) Slide the roll guide shaft to the left and align the three grooves of the roll guide
shaft with the three ribs of the roll guide to remove the roll guide shaft from the
roll guide.
NOTE: Take care not to lose the spring.
(4) Remove the roll guide spring B from the roll guide shaft.
Roll guide spring A
Roll guide actuator
Pins
Roll guide spring B
Roll guide shaft
Roll guide
Figure 3.4-9 Disassembling the Roll Guide
III - 10
Ribs