20-225.fm Page 5 Wednesday, August 4, 1999 10:07 AM
SETTING THE CLOCK
After you connect power,
on the display and the clock begins
to run.
Follow these steps to set the time.
1. Press and hold
appears.
2. While holding down
press
HR
to set the hour.
3. While holding down
press
to set the minute.
MIN
Notes:
• To advance the settings rap-
idly, press and hold
.
MIN
•
appears when the clock
PM
displays a PM hour.
appears when the clock dis-
plays an AM hour.
4. Release
TIME ADJ
pears.
USING EARPHONES
flashes
You can use the built-in speaker to
SEC
listen to the radio. Or, you can use
stereo earphones (not supplied) with
a
/
1
Insert the earphones'
.
TIME ADJ
ADJ
into the radio's earphone jack.
,
Note: The built-in speaker discon-
TIME ADJ
nects when you plug in earphones.
,
TIME ADJ
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones.
HR
or
• Set the volume to the lowest
AM
• Do not listen at extremely high
.
disap-
ADJ
• Once you set the volume, do
-inch plug to listen in private.
8
/
1
8
setting before you begin listen-
ing. After you begin listening,
adjust the volume to a comfort-
able level.
volume levels. Extended high-
volume listening can lead to
permanent hearing loss.
not increase it. Over time, your
ears adapt to the volume level,
so a volume level that does not
cause discomfort might still
damage your hearing.
-inch plug
5