Using Ac Power - Radio Shack DX-395 Owner's Manual

Fm/am/sw1/sw2 pll synthesized receiver
Table of Contents

Advertisement

20-225.fm Page 4 Wednesday, August 4, 1999 10:07 AM
• Always plug the adapter into the
radio before you plug it into the
cigarette lighter socket. Always
unplug the DC adapter from the
cigarette lighter socket before
you unplug it from the radio.
1. Set the adapter's voltage switch
to 6V.
2. Insert the adapter's barrel plug
into the radio's
DC 6V
3. Insert the adapter's cigarette-
lighter plug into the vehicle's
cigarette lighter socket.

Using AC Power

To power the radio with AC power,
you need an AC adapter (not sup-
plied). We recommend Radio Shack
Cat. No. 273-1650.
Cautions:
• You must use an adapter that
supplies 6 volts with the center
tip set to negative, delivers at
least 300 milliamps, and has a
plug that correctly fits the radio's
jack. The recommended
DC 6V
adapter meets these require-
ments. Using an adapter that
does not meet these specifica-
4
tions could seriously damage
the radio.
• Always plug the adapter into the
radio before you plug it into the
AC outlet. Always unplug the AC
adapter from the AC outlet
before you unplug it from the
radio.
Note: Follow the adapter's instruc-
tions to set the voltage switch to 6
volts and select the proper adapta-
plug.
jack.
1. Insert the adaptaplug into the
radio's
2. Plug the adapter into a standard
AC outlet.
jack.
DC 6V

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents