Samsung InfoRanger SCM-140U User Manual page 34

Chapter 3
3-6
Installing the InfoRanger
Install the driver for USB port
The final step for using USB port is to install the driver for USB port using USB
driver diskette provided with InfoRanger. Do the following steps to install USB
driver.
You can download a manual describing more in detail how to install USB
driver for InfoRanger SCM-140U in www.samsungnetwork.com.
For Windows 98 SE
1. When you connect the InfoRanger and PC, the <Add New Hardware Wizard>
window appears. Click [Next] to go on to the next step.
2. Select Search for the proper driver for your device (Recommended) in the
following window, and click [Next] to go on to the next step.
3. Select Floppy Disk Drive as a location of a new driver and insert the USB driver
diskette provided with InfoRanger into floppy disk drive. Click [Next].
4. Select Use an updated Driver (Recommended)-Samsung Cable Modem USB Driver
in the following window, click [Next] to go on to the next step.
5. A window appears reporting it has found the appropriate driver in the floppy
disk as following. Click [Next] to go on to the next step.
6. Click [Next] in the following window which reports it is ready to install
Samsung Cable Modem USB Driver. Insert Windows 98 SE CD into CD-ROM
drive during installation when a message appears requesting to insert
Windows 98 SE CD into CD-ROM drive. Click [Next] when CD-ROM is ready.
7. Click [Finish] to finish the installation process and restart the system.