Advertisement
±
"016'"
Your Wireless Surveillance System
is factory preset at channel 1 for
one camera use.
6
CH. 1 2 3 4 5
setting which produces the best sound and picture. Make
sure that the camera and monitor are set to the same
channel.
Dip switches
you set up the auto-sequence timer for four cameras on four
different channels to monitor a series of rooms for maximum
±
supervision of the house (or office).±
"
1. Plug the large AC adapter cord into the
2. Plug the AC adapter into a standard wall outlet.
3. Rotate the monitor's
4. Adjust the video image using
5. Locate and orient the antennas on both the camera and
#WFKQ"1WVRWV
To transfer the monitor's sound to a TV or to a VCR for
recording purposes, connect the monitor's
to a TV's or VCR's audio input.
8KFGQ"1WVRWV
Connect the monitor's
video input for a large screen display, or to record
transmissions.
dip switches in different positions and use the
to
are for channel selection. Switch
1
4
on rear left of the monitor.
the monitor and adjust volume to a comfortable
listening level.
(Contrast) and
CONT
right of the monitor.
monitor according to "Orienting Antennas for Optimal
Performance" on Page 7.
VIDEO OUTPUT
clockwise to turn on
VOL ON/OFF
(Vertical Hold),
V-HOLD
(Brightness) on the rear
BRIGHT
AUDIO OUTPUT
to a TV's or VCR's
lets
5
jack
DC 13.5V
Advertisement
