2. Install two batteries in the compartment and two in the cover as
indicated by the polarity symbols (+ and –) marked inside each
location.
3. Replace the cover.
When
BATT.Lo
mediately replace or recharge all four batteries.
Cautions:
• If you do not plan to use the scanner with batteries for a month or
more, or if you plan to use only an AC or DC adapter, remove the
batteries. Batteries can leak chemicals that can destroy electronic
parts.
• Dispose of old batteries promptly and properly. Do not burn or bury
them.
IMPORTANT INFORMATION ABOUT THE
EXTERNAL POWER JACKS
POWER Jack
CHARGE Jack
The scanner has two external power jacks —
is important that you understand the purpose of each jack before you
connect any adapter to the scanner.
flashes and the scanner beeps every 15 seconds, im-
and
POWER
CHARGE
. It
9