Multitech MultiModemDSVD User Manual page 32

MultiModemDSVD User Guide
Note: When you turn on the modem, the speed lights flash briefly as the modem
does a self-test, then the LED for the default modem baud rate lights. The default
rate for the modem is 56K bps. After a call, the LEDs for the connection's baud rate
remain lit until another call is made or the modem is reset. If you connect at a rate
under 14,400 bps, all speed LEDs remain off after the connection is broken, even
though the modem is still turned on.
24