Windows Hyperterminal - Multitech MultiModemDSVD User Manual

MultiModemDSVD User Guide
14. At the file name prompt, if you have Microsoft Word 6.0 or later, type register.doc
15. Press ENTER twice more.
16. To select the Zmodem transfer protocol, type Z and press ENTER.
17. The download begins automatically. As the file is downloaded, a dialog box re-
18. To log off the BBS, press ENTER, type G for "good-bye," and press ENTER

Windows HyperTerminal

1. Click Start; then choose Programs, Accessories, and HyperTerminal.
2. Start HyperTerminal by double-clicking on the Hypertrm icon. HyperTerminal
3. Type Multi-Tech BBS in the Name box and click OK.
4. In North America, type 800 in the Area code box and 392-2432 in the Phone
5. Verify that your modem is selected in the Connect using box, then click OK.
6. In the Connect dialog box, click Dialing Properties.
7. Make any necessary changes in the Where I am and the How I dial from this
8. Click OK, then click Dial. You will know you have reached a modem by the
9. When the BBS welcome screen appears in the HyperTerminal window, type
10. Press ENTER until the Main Menu appears. From the Main Menu you have access
11. In the Main Menu, type F and press ENTER to access the Files Menu, then type
12. At the prompt, if you have Microsoft Word 6.0 or later, type register.doc and
13. Type Z and press ENTER to select the Zmodem transfer protocol.
12
and press ENTER. If you do not have Microsoft Word, type register.txt and
press ENTER.
ports on the progress of the download. If the download fails, your baud rate
may be set too high. Log off, set the COM port baud rate lower, and call again.
twice more.
asks for the name of the connection.
number box. Local and international users, type 612 in the Area code box and
785-3702 in the Phone number box.
location boxes. If you must dial 9 to access an outside line, you should type 9 in
both the local and the long distance boxes unless your phone system has a special
requirement.
harsh sounds of the modem handshake.
your first name, last name, and password following the prompts. If you are a
first-time caller, the BBS asks if your name is spelled correctly. If you answer Y,
a questionnaire appears. You must complete the questionnaire to use the BBS on
your first call.
to two areas: the Files Menu and News. For help with menu commands, type ?.
D and press ENTER to download.
press ENTER twice. If you do not have Microsoft Word, type register.txt and
press ENTER twice.