Understanding; Channel Storage Banks; One Touch Banks - Radio Shack PRO-82 Owner's Manual

±
"016'"
Channel Storage
Banks
The scanner is preset
so each bank is
turned on (see
"Turning Channel-
Storage Banks Off
and On" on Page 29).
One-Touch Banks
The frequencies in the
scanner's one touch
banks are preset. You
cannot change them.
±
"016'"
Both frequencies
(transmission and
reception) are shown
for marine channels
used for duplex
transmission.
20
70&'456#0&+0)"
$#0-5
%JCPPGN"5VQTCIG"$CPMU
A bank is a storage area for a
group of channels. Channels are
storage areas for frequencies.
Whereas a channel can only
contain one frequency, a bank can
hold numerous channels.
To make it easier to identify and
select the channels you want to
±
"
listen to, your scanner divides the
channels into 10 banks (1 to 10) of
20 channels each, a total of 200
channels. You can use each
channel-storage bank to group
frequencies. ±
1PG"6QWEJ"$CPMU
The scanner is preprogrammed
with the frequencies allocated by
marine, fire/police, aircraft, ham
radio, and weather services. This
is handy for quickly finding active
frequencies instead of searching
through an entire band (see
"Searching the One Touch Banks"
on Page 25). ±
Marine
%JCPPGN
±
"
01
05
06
07
08
09
10
11
(TGSWGPE["
*/*\+
156.0500
156.2500
156.3000
156.3500
156.4000
156.4500
156.5000
156.5500