Fujitsu ARTG30LHTA Service Instruction page 76

hook
screw
9) Loosen the screw.
8) Take out the SIROCCO FAN
and CASING.
Unlock the point.
Note at the installation.
■Please install it so that a motor band touches rubber.
OK NG
■Insert SIROCCO FAN and MOTOR SHAFT reference D cutting position.
Please insert it till a SIROCCO FAN stop.
MOTOR SHAFT
1) Insert it till a SIROCCO FAN stop.
2) Tighten the screw.
5. SIROCCO FAN removal
screw
hook
1) Remove the screws(4 places). 2) Take it out the SIROCCO FAN.
03-04