3-1. POWER SUPPLY PCB removal
1) Remove the connectors and each wires.
3-2. CONTROLLER PCB removal
1) Remove the connectors and each wires.
3-3. FILTER PCB removal
1) Remove the connectors,
each wires and
terminal wire (black,white,red).
locking spacers
2) Remove the locking spacers(4 places).
locking spacers
2) Remove the earth screw
and locking spacers(4 places).
screw
2) Remove the mounting screws
(2 places).
3) Remove the terminal bracket.
earth screw
locking spacers
Hook
earth
screw
4) Remove the earth screw
and locking spacers(5 places).