Panel Descriptions; Top Panel/Front Panel - Roland XS-1HD Owner's Manual

Panel Descriptions

Top Panel/Front Panel

[COLOR] buttons
These buttons operate as follows according to the
screen mode.
Matrix mode / Switcher mode (p. 17)
The button applies a fade to the output video,
outputting a single-color (background color) image.
The [COLOR] button indicates the fade status.
Lit red
Faded out
Blinking red Fading in/out
Lit white
Normal output
Split mode (p. 14)
Layers are hidden. When layers are hidden, the
[COLOR] button is lit red.
Cross-point buttons
These buttons operate as follows according to the screen mode.
* Buttons for which valid video is being input are lit white.
Matrix mode (p. 13)
These buttons switch the cross-point of the video channel.
Split mode (p. 14)
These buttons select the video to composite.
Switcher mode (p. 15)
XPT1 — (Not used.)
These buttons select the video source used as the PinP inset screen. The color in which the button
is lit indicates the output destination of the composited result.
Lit green Preview output only
XPT2
Lit red
* The PinP inset screen can also be key-composited.
* If the AUX bus is assigned to the VIDEO OUTPUT 3 connector, these buttons select the input channel
that is sent to the AUX bus.
These buttons select the final video output. The button of the channel that is being finally output is lit red.
XPT3 (PGM)
* When compositing video, these buttons select the background video
XPT4 (PST) These buttons select the preset video (the video that will be output next). The selected button is lit green.
6
Final output, preview output
MAIN level meter
This indicates the volume level of the audio output.
[TIME] knob
This knob specifies the transition time
* This is also used as the fade time of the
video output (p. 17) and the fade time when
compositing video.
p. 18
p. 13, 14, 15