Yamaha DME 32 Service Manual page 11

7-3 PNF1/4(FP) Circuit Board:
Remove the four (4) screws marked [30A]. The
PNF1/4(FP) circuit board can then be removed. (Fig. 7)
PNF2/4(ENC) Circuit Board:
7-4
Remove the four (4) screws marked [30B]. The
PNF2/4(ENC) circuit board can then be removed. And
then pull out the encoder knob from the PNF2/4(ENC)
circuit board. (Fig. 7)
PNF3/4(LED) Circuit Board:
7-5
Remove the screw marked [30C]. The PNF3/4(LED)
circuit board can then be removed. (Fig. 7)
7-6 PNF4/4(PSW) Circuit Board:
Pull out the power switch knob. Remove the two (2)
screws marked [60]. The PNF4/4(PSW) circuit board can
then be removed. (Fig. 7)
LCD:
7-7
Remove the screw marked [50]. The LCD can then be
removed. (Fig. 7)
<Top View>
[240]
[390]
[240]
PNR 2/3(PCMUSB)
[240]: Bind Head Screw 4.0X8 MFZN2BL (EG340360)
[390]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
<Front View>
[30C]
PN
3/4(LED)
[30A]
PNR
1/3(MYMB)
[240]
[390]
Fig. 5
LCD
PN 1/4(FP)
[30]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
[50]: Pan Head Screw 2.6X6 MFZN2BL (VC990500)
[60]: Bonding Screw 3.0X6 MFZN2BL (VS863000)
Front panel
[90]: Oval Head Screw 4.0X8 MFZNBL (VS153600)
PN
[50] [30B] 2/4(ENC)
[30B] [30A]
Fig. 7
DME32
[90]
[90]
Fig. 6
[30A]
[60]
PN
4/4(PSW)
[60]
11