Operation - LG AS-H096PBC0 Service Manual

Operation

Name and Function-Remote Control
The remote control transmits the signals to the system.
5
6
4
2
7
ON
11
8
13
14
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
Signal transmitter
1
3
10
CANCEL
9
OFF SET
AUTO CLEAN
16
12
15
Flip-up door
(opened)
)
START/STOP BUTTON
1
Operation starts when this button is pressed and
stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
3
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps low,
medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed cooling/heating.
(speed cooling/heating operates super high fan
speed in cooling/heating mode)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set
the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
8
Used to adjust the time.
TIMER SET/CANCEL BUTTON
9
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling or
heating.
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification
function.
RESET BUTTON
14
Used prior to resetting time or after replacing bat-
teries.
2nd F Button
15
Used prior to using modes printed in blue at the
bottom of buttons.
AUTO CLEAN
16
Used to set Auto Clean mode.
-33-