Setting The Clock; Setting The Hour - Radio Shack 12-256 User Manual

1. Turn counterclockwise until it clicks to turn on the
VOLUME
power.
2. Hold down
WEATHER
into the jack. The power indicator flashes briefly. When
DC 6V
it lights steadily, release
Note: The time announcement sounds when you press
. This function works whether the weather broadcast
CLOCK
and are on or off.
VOLUME
3. Use a straightened paper clip to press
sound the alert tone. Press

SETTING THE CLOCK

If the radio receives an alert signal while you are setting the clock,
the radio exits the clock setup mode without updating the time.

Setting the Hour

1. With on or off, connect the radio to power and hold
VOLUME
down with a straightened paper clip for 2 seconds to
SET
enter clock setup mode.
2. Using a straightened paper clip, hold down
matically advance the hour. The radio announces each hour.
3. When you hear the correct hour, release
once to confirm the entry and enter the minute setting
SET
mode.
or while inserting the barrel plug
CLOCK
or .
WEATHER CLOCK
SET
or again to stop it.
SET SCROLL
SCROLL
SCROLL
6
or to
SCROLL
to auto-
and press