Pc Link; Installing The Supplied Software; Transferring Records - Radio Shack 65-790 Owner's Manual

256k desktop electronic organizer with caller/call waiting id
Table of Contents

Advertisement

65-790.fm Page 24 Monday, November 29, 1999 3:59 PM

PC LINK

You
can
transfer
records and schedule records to or from
your organizer to or from another Ra-
dioShack 256K Desktop Electronic Or-
ganizer or to a PC (personal computer)
using an optional PC Link cable and
software (available through your local
RadioShack store).
Cautions:
• Always turn off your computer
before connecting or disconnecting
the PC Link cable to or from the
organizer or computer.
• When disconnecting the cable from
your organizer or the computer, hold
and gently pull on the connector
plug. Do not pull the cable.
Insert the cable's connector into
on the side of the organizer, then con-
nect the other end of the cable to a PC
or the other organizer.
INSTALLING THE
SUPPLIED SOFTWARE
1. Close all programs in use, then
insert the diskette supplied with the
optional PC Link cable into your
computer's floppy disk drive.
2. From the Start Menu, select Set-
tings, then click on Control Panel.
3. Double click Add/Remove Pro-
grams.
4. Click Install, then follow the instruc-
tions that appear.
5. Select
Model J
Menu.
24
TRANSFERRING
phone
directory
RECORDS
Note: In the following steps, we refer to
the organizer or PC that contains re-
cords you want to transfer as the
"source," and the organizer or PC where
you want to store transferred records as
the "target."
PC LINK
To cancel the transfer at any time, press
on the PC Link
DELETE
nizer.
1. Use the source organizer or PC to
select the phone directory or sched-
ule records you want to transfer.
2. Follow the directions in the PC
Link's owner's manual to specify the
serial port used to connect the
source and target organizer and PC,
and to select the same function that
you selected on the source orga-
nizer and PC.
3. To transmit records to a personal
computer, press
SEND
nizer.
transmit all? Y/N
pears.
4. To transmit all selected records,
press
. Otherwise, press
Y
To transmit a single record to a PC,
open the record you want to trans-
fer, send it to the top of the display,
then press
on the organizer.
SEND
transmit? Y/N
transmit the record, press
wise, press
.
N
To receive records from a PC, press
on the organizer.
RECEIVE
ceive? Y/N
appears. To receive
the records, press
press
.
N
on the source or target orga-
on the orga-
ap-
.
N
appears. To
. Other-
Y
re-
. Otherwise,
Y

Advertisement

Table of Contents
loading

Table of Contents