Factory Settings - NETGEAR XR500 Nighthawk User Manual

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and
hold the Reset button on the back of the router for up to 30 seconds or until the Power LED starts blinking
amber. The router resets and returns to the factory configuration settings shown in the following table.
Table 3. Router model XR500 factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP address
(LAN)
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time adjusted for daylight saving
time
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
XR500 Nighthawk Pro Gaming Router
Default Setting
www.routerlogin.net or www.routerlogin.com
admin
password
Use default hardware address
1500
Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Supplemental Information
182