Connecting The Telephone And Modem Cables - Sony Vaio PCV-2200 Quick Start Manual

Hide thumbs Also See for Vaio PCV-2200:
Table of Contents

Advertisement

Genesis_QS.book Page 20 Tuesday, December 3, 2002 1:39 PM
VAIO Computer Quick Start

Connecting the Telephone and Modem Cables

1
Unplug your telephone from the wall jack and plug its cable into the
telephone jack located on the back panel of your computer.
2
Plug the modem cable (supplied) into the modem line jack located on the
back panel of your computer
3
Plug the other end of the modem cable into the wall jack.
To connect the telephone and modem cables
Your computer has a protective sticker
on the rear panel. Connect only 10BASE-T and 100BASE-TX cables to the
Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire
in the Ethernet port. For help on connecting to a network, see your network
administrator.
20
covering the Ethernet port located

Advertisement

Table of Contents
loading

Table of Contents