Advertisement
Even if you are not completing installation yourself, it's good to familiarize
yourself with these important steps to ensure proper set-up.
3. Level the Appliances Properly
As with any washer or dryer, leveling
the appliance is necessary. And
because the Duet
and Duet HT
®
washers reach final spin speeds of up
to 1000 and 1200 RPMs, it's even
more important to level the product
to avoid excessive noise and
vibrations. You can find detailed
leveling instructions in your Use
and Care Guide.
4. Always use High-Efficiency Detergent
High-efficiency detergents are
specifically designed for low-water
washers to provide excellent stain
removal and whitening without
oversudsing. Using a regular
detergent in this washer will likely
result in washer errors, longer cycle
Call 1-800-253-1301 to speak to a Duet
see your Use and Care Guide for complete installation instructions.
TIDE is a registered trademark of The Procter & Gamble Company. ®Registered trademark/™ Trademark of Whirlpool, U.S.A. ©2004 Whirlpool Corporation. All rights reserved.
After you Buy
If installing the washer and dryer
with pedestals, you will complete
leveling with the pedestal feet. Keep
®
the pedestal drawer out during
installation so that you can easily
reach and adjust the rear feet. Once
the appliance is level, ensure that all
four feet are in firm contact with the
floor and tighten each foot's locking
nut to the washer/pedestal base.
times, reduced rinsing and cleaning
performance, and/or oversudsing.
Plus, using a regular detergent in this
washer can cause clothes to yellow
and look dingy over time. Only use
a detergent that bears the high-
efficiency mark, like Tide
Questions about installation?
Form # EWPL_MIC_604_021. Printed in the U.S.A. 08/04. www.whirlpool.com.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install washer or dryer.
Failure to do so can result in back
or other injury.
HE.
®
fabric care expert and/or
®
Advertisement
