Questions About Installation - Whirlpool WPL-2727 Very Important Purchase Information

Hide thumbs

page of 5

/ 5
Bookmarks

1. Determine Your Installation Area

Ensure that your laundry area

is large enough:

• The washer and dryer are each

27" wide (54" wide when placed

side-by-side) and 31.5" deep

• The depth of the washer with the

door open is 50.5" and the depth

of the dryer with the door open

is 51.5"

2. Determine Your Installation Configuration

The Duet

fabric care system may

be installed in three different

configurations.

Stacked with dryer on top of washer

NOTE:

In order to avoid potential leaks and to ensure proper operation, the Duet

dryer door can be reversed. Door reversal kits (#3979303/Tidal Blue, #3979304/Dove Grey, #3979770/Biscuit and #3980097/Pewter)

can be purchased separately by calling 1-888-222-8608.

IMPORTANT:

If you plan to install the Duet

ordering online at www.whirlpool.com. If you plan to install your Duet

left and the dryer on the right. If your water hook-up and vent are in the opposite location, longer fill hoses, drain hose extensions,

and venting extensions are available at stores where appliances are sold.

Call 1-800-253-1301 to speak to a Duet

see your Use and Care Guide for complete installation instructions.

Before you Buy

• You'll also need a minimum of 5.5"

behind the dryer for venting

38"

31.5"

Determine the area where yours

50.5"

will be installed and select the

appropriate set-up.

Side-by-side under an existing cabinet

pair stacked, purchase a stack kit (#8541503) by calling 1-888-222-8608 or