1.
Enter the password
Cursor
Notes for operation
1. Press the scroll keys to move the cursor to the character to be selected, and then press
the [OK] key.
• Press the selection key on the left to switch between alphabetical or numerical
characters.
• Press the selection key in the center to delete an entered character.
2. Press the selection key on the right when after entering all the characters.
• When a number entry screen such as the one shown below is displayed, press the [ ] or [ ] key to
change the number. Press the [ ] key to move to the next input field.
• Press the selection key on the left to switch between + and -.
Press [Exit]
How to Use the Control Panel
DUP365
DUP366
9