Using Voice Features - Kyocera K126C User Manual

Using voice features

You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to the AC adaptor.
Waking up the phone
If your phone is connected to a Kyocera hands-
free headset, you can use the voice command to
activate the phone to make a phone call.
To activate the Voice wake-up setting:
→
• Select
Menu Settings
→
Voice wake-up
To wake up the phone:
Say " " and listen for a tone.
1. Wake up
Say " " again until you hear two tones.
2. Wake up
Answering the phone
You can set your phone to (1) answer
automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
This setting also works with the portable
Note:
hands-free headset.
→
• Select
Menu Settings
→
Auto-Answer After 5 seconds
36
→
Voice Services
→
With ext. pwr.
→
Accessories
.
Answering using voice commands
If Auto-answer is turned off, you can use a voice
command to answer an incoming call when using
a hands-free headset.
• Select
Menu
Auto-Answer
To activate the Voice answer setting:
Select
1. Menu
Voice Answer
Highlight
2.
To answer a call:
When you receive an incoming call, the
phone responds: "Incoming call, answer?" If the
caller is recognized as a contact entry in your
phone, then the phone will say "Incoming call
from (Name), answer?"
• Say "
Yes
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say " " and press
No
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
main screen.
→
→ →
Settings Accessories
→
.
Disabled
→ →
Settings Voice Services
.
and press
Enabled
" or press any key except
to silence the alert.
Using Voice Recognition
→
→
.
.