Using Voice Features With Accessories - Kyocera KX444 User Manual

Using voice features with
accessories
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to an accessory such as a hands-free
car kit or headset (both sold separately). To shop
for these accessories, visit
www.kyocera-
or call (800) 349-4188
wireless.com/store
(U.S.A. only) or (858 882-1410.
Waking up the phone
If your phone is connected to a Kyocera hands-
free car kit or headset, you can use a voice
command to activate the phone to make a phone
call.
Voice Wake-up does not work with Keyguard
active.
To activate the Voice Wake-up setting:
→ →
Select
1. Menu Settings Voice Services
→ →
=
Voice Wake-Up With ext. pwr
→ →
Select=
2. Menu Settings Keyguard
, then press .
Disabled
To wake up the phone:
Say and listen for a tone.
1. "Wake Up"
Say again until you hear two tones.
2. "Wake Up"
If the phone does not recognize your "Wake up"
command, see "Training voice recognition" on
page 45.
44
Answering the phone
You can set the hands-free car kit to either (1)
answer automatically or (2) ring until you press a
key or answer using a voice command.
Answering automatically
To set it to answer automatically:
→
• Select
Menu
→
Auto-Answer
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using a
Kyocera hands-free car kit or headset.
To turn off Auto-Answer:
→
• Select
Menu
→
Auto-Answer
To activate the Voice Answer setting:
Make sure the phone is not in Silence All
1.
mode.
.
Your phone is in Silence All
→ 2.
mode if one of these icons
appears on your screen.
→
Select
Menu
Norm. Sounds
→
Select
3. Menu
→
Voice Answer
=
Highlight
4. Enabled
To answer a call:
→ →
Settings Accessories
.
After 5 secs
→ →
Settings Accessories
.
Disabled
→ →
Settings Silent Mode
to make the icon disappear.
→
Settings Voice Services
.
, then press
.
Using Voice Recognition