Playback Menus - JVC GR-D820EK Instructions Manual

36
EN Menus For Detailed Adjustment Menus For Detailed Adjustment
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and
plays the sound back. Select the type of sound to accompany your playback picture.
"SNAP/SLOW" is linked with "RECORDING" which appears when the Power Switch is set to "REC".
Menus
SOUND L/R
NARRATION
GR-D860
SNAP/SLOW
[T] -> [M]
COPY
*
GR-D860
Each setting (except "OFF" in "ON SCREEN", "DATE/TIME", and "TIME CODE") is linked with
"DISPLAY", which appears when the Power Switch is set to "REC".
The parameters (except "OFF" in "ON SCREEN" setting) are the same as in the description on (
Menus
ON SCREEN
DATE/TIME
TIME CODE
WIDE TV
LCD BRIGHT
SETTING
Each setting (except "DEMO MODE") is linked with "SETTING", which appears when the Power
Switch is set to "REC". The parameters are the same as in the description on page

Playback Menus

[STEREO ]: Sound is output on both "L" and "R" channels in stereo.
SOUND L : Sound from the "L" channel is output.
SOUND R : Sound from the "R" channel is output.
Although it is not possible to perform audio dubbing with this
GR-D820
camcorder, you can hear sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both "L" and "R" channels in stereo.
ON: Dubbed sound is output on both "L" and "R" channels in stereo.
MIX: Original and dubbed sounds are combined and output in stereo
on both "L" and "R" channels.
33, "SNAP/SLOW".
[OFF]: When the SNAPSHOT button is pressed during tape playback,
the playback image pauses and normal playback will resume after
approximately 6 seconds. (The still image is not recorded).
ON: Enables dubbing of images recorded on a tape to a memory card
42).
(
OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
[OFF] / AUTO / ON
[OFF] / ON
22, "Time Code".
[ON] 16:9 / OFF 4:3
34, "WIDE TV".
20, "Brightness Adjustment Of The Display".
Settings: [ ] = Factory-Preset
Settings: [ ] = Factory-Preset
34).
35
.