System Settings - Siemens OP7 Equipment Manual

System Settings

In this chapter
This chapter informs you of functions that can be triggered by standard
screens to perform system settings. They include:
10.1 Selecting a Language
Languages The configuration can be loaded on the OP in up to three languages simulta-
available
neously. You can switch between the separate languages online at any time.
After switching over, all language-dependent text is displayed in the new
language. The following languages are available for OP7 and OP17:
Procedure
To choose another language, proceed as follows:
Equipment Manual OP7, OP17
Release 04/99
Selecting a language,
Modifying parameters for OP interfaces, printers, message display, date
and time,
Adjusting display contrast,
Setting OP mode.
German
English
French
Italian
Spanish
Russian (Cyrillic characters)
Step
1 Choose the standard screen System settings
2 Select the language you require by means of a symbolic input.
The selection list contains only the languages which have been
loaded on the OP.
The OP performs a cold restart and loads all elements of lan-
guage-dependent text in the new language.
10
Procedure
Language.
10-1