Radio Shack MICRO-36 Owner's Manual page 7

(neither supplied, available at your local
RadioShack store).
Cautions:
You must use a (Class 2 for
!
AC) power source that sup-
plies 3 volts DC power and
delivers at least 200 mA. The center
tip of the Adaptaplug must be set to
positive, and the plug must properly
fit the recorder's
DC3V
AC adapter and plug that do not meet
these specifications could damage
the recorder, the adapter, or the plug.
• Always connect the adapter to the
recorder before you plug it into the
power source, and
adapter from the power source before
you unplug it from the recorder.
1. If necessary, set the adapter's volt-
age switch to 3V.
2. Attach the Adaptaplug
adapter's cord with the tip set to posi-
tive (+).
3. Insert the barrel
recorder's jack. This discon-
DC3V
nects the internal batteries.
Preparation
jack. Using an
unplug the
to the
plug into the
7