3
Select the desired connection.
When another Bluetooth
nected
To disconnect the Bluetooth
select "Yes".
4
Check that a confirmation screen is dis-
played when the connection is com-
plete.
If an error message is displayed, follow the
guidance on the screen to try again.
INFORMATION
It may take time if the device connection
●
is carried out during Bluetooth
playback.
Depending on the type of Bluetooth
●
device being connected, it may be neces-
sary to perform additional steps on the
device.
When disconnecting a Bluetooth
●
device, it is recommended to disconnect
using the navigation system.
■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.53)
Leave the Bluetooth
tion where the connection can be estab-
lished.
When
ACCESSORY or IGNITION ON mode,
®
device is con-
the system searches for a nearby registered
device.
®
device,
The system will connect with the registered
device that was last connected, if it is
nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
®
Press the "SETUP" button.
audio
2
Select "Bluetooth*".
®
3
Follow the steps in "CONNECTING A
Bluetooth
(P.48)
®
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
GX460_Navi_OM60M79U_(U)
15.05.21 18:35
®
2. Bluetooth
SETTINGS
®
device in a loca-
the
engine
switch
®
®
DEVICE" from "STEP 2".
is
in
2
man-
49