Installation and Connection
Installation and Connection
Installing the unit
Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for KW-V640BT Region 4)
]
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
52
ENGLISH
Installing the trim plate
(Only for KW-V640BT Region 4)
Remove the separator of the trim plate (
then attach the trim plate (
π / [
Car bracket
Removing the unit
(Only for KW-V640BT Region 4)
'
),
1
Remove the trim plate (
'
) to the unit.
'
2
Remove the unit by inserting the two
extraction keys (
illustrated.
Be careful to avoid injury from the catch pins on
the extraction key.
'
).
'
\
), then pulling them as
\