SETTING THE DEFAULT PARAMETERS
1. If necessary, press MODE key until the display shows corresponding mode indicator (e.g., pH mode).
2. Press and hold the CAL key for 3 seconds, the meter enters setup menu, and the display shows selectable
parameter and page number.
3. Press ▲ or ▼ key to scroll through menu, select the parameter you want to set (Refer to Setup Menu section).
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
helpme@kensingtonscientific.com.au
www.kensingtonscientific.com.au
User Manual
KS-PH-221-DELUXE |
Portable pH/ORP Meter
Deluxe