Measurement Modes - Kensington KS-PH-221-DELUXE User Manual

MEASUREMENT MODES

pH MEASUREMENT
1. Press the MODE key until the meter shows the pH indicator
2. Rinse the pH electrode with distilled water to remove any impurities adhering to the probe body.
3. Dip the electrode into the sample solution, stir the sensor gently.
4. Wait for the reading to stabilize, record the measured value on the display.
ORP MEASUREMENT
ABSOLUTE MILLIVOLT MODE
Press the MODE key until the display shows measurement unit "mV", the meter is now enters absolute millivolt
measurement mode.
RELATIVE MILLIVOLT MODE
Press the MODE key until the display shows measurement unit "ORP", the meter is now enters relative millivolt
measurement mode.
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
helpme@kensingtonscientific.com.au
www.kensingtonscientific.com.au
User Manual
KS-PH-221-DELUXE |
Portable pH/ORP Meter
Deluxe