Recording Multiple Tracks; Editing Memory Contents; Editing A Song - Radio Shack 42-4058 Owner's Manual

± ±
• Do not change a note identical to the
preceding or succeeding note. Doing so
might alter the length of the note and you
will have to re-record the entire track.
• When you change note, key pressure, or
chord, the keyboard sounds the new setting
so you can hear what it sounds like.
• Some parameters are stored in the initial
portion of the memory, called "Panel
Record." You cannot edit data in this field
using the procedure described here. See
"Rewriting Song Data (Panel Record)" on
Page 19.
• The tone and rhythm you selected before
beginning recording are stored in the panel
record. You can only change tone or rhythm
during recording.
• The only parameters that can be edited for
Tracks 2–6 are notes and tone numbers.
• You cannot add data to a recording.
• You cannot move portions of a recording to
a different location within the recording.
• You cannot change note lengths.
18
( ) to cancel the rewrite operation.
EXIT
±
In addition to Track 1, where you record auto
accompaniment as well as keyboard play,
there are five other tracks you can use to
record melody parts only. You can record
different tones on these tracks and build a
full ensemble of instruments.
You can play back what you already
recorded on Track 1 (or any other track)
while you record on Tracks 2–6.

1. Repeatedly press
SONG MEMORY
appears.
2. Within 5 seconds, repeatedly press
+ or – to select a song number.
3. Press the desired
SONG MEMORY
( – ) to select the track you
TRACK 2 6
want to record on.
4. If desired, you can change the tone
number and tempo settings. You can
change the tempo to one that is easy
for you to follow.
5. Press to start recording.
START/STOP
The contents of any tracks already
recorded start to play.
6. Play on the keyboard what you want to
record on the selected track.
7. Press to end recording.
START/STOP
If you used them, tone number and optional
pedal operation are also stored on the
selected track in addition to the notes you
played.
1. Repeatedly press
SONG MEMORY
appears.
2. Within 5 seconds, repeatedly press
or to select a song number.
+ –
3. Press the desired
SONG MEMORY
( – ) to select the track you
TRACK 2 6
want to record on.
4. Change the tone, if desired. After
selecting a tone, press any keyboard
key to clear the tone selection display
and return to the note input screen.
5. Use the keyboard to enter notes or
enter rests.
• When you enter a note using the
keyboard with touch response turned
on, the key pressure is also
recorded.
• To delete a rest entry, press
6. Use – to enter the length of the note
1 9
or rest.
7. Continue entering notes by playing
them and specifying their length.
8. Press
START/STOP
You can recall and change individual notes
and parameter settings from a song in
memory. ±
1. Repeatedly press
appears.
2. Within 5 seconds, repeatedly press
or to select a song number.
+ –
until
3. Use
SONG MEMORY TRACK
select the track you want to edit.
4. Press I (
CURSOR
5. Repeatedly press I or J (
move to the entry you want to change.
You can change the parameter that is
flashing on the display. To change a
different parameter, repeatedly press I
or J (
CURSOR
want to edit flashes.
6. Make the desired changes to the
selected parameter.
The procedures you use to change a
parameter depend on the type of data it
contains. See "Editing Techniques and
Display Contents".
7. Repeat Steps 5 and 6 to edit other
parameters.
8. Press
START/STOP
finished.
until
Key Pressure (Velocity) — Repeatedly
press + and – or use the number buttons to
adjust the key pressure.
Pitch — Enter a new note on the keyboard
or repeatedly press + or – to change to the
next higher or lower note. The keyboard and
the staff on the display show your new entry.
Chord — Use the appropriate chord
fingering method for the MODE setting.
Tone Number/Rhythm Number —
Repeatedly press + or – or use the number
buttons to enter a number.
to
0
Rhythm Controller
VARIATION/FILL-IN 1
) — Press the button for the function
NEXT
you want to change to.
again.
0
You can delete an entire song, a specific
track, or data associated with the song.
to end recording.
until
SONG MEMORY
( – ) to
1 6
) to enter edit mode.
) to
CURSOR
) so the parameter you
when you are
or ,
(INTRO/ENDING 1 2
or ,
2 SYNCHRO/FILL-IN