Safety Training Information - Baofeng UV-82 Operating Manual

SAFETY TRAINING INFORMATION

Your BAOFENG radio generates RF electromagnetic en-ergy during
transmit mode. This radio is designed for and classified as
"Occupational Use Only", meaning it must be used only during the
course of employment by individuals aware of the hazards,
Warning
not intended for use by the "General Population" in an
uncontrolled environment.
This radio has been tested and complies with the FCC RF exposure limits for
"Occupational Use Only." In addition, your Quansheng radio complies with the following
Standards and Guidelines with regard to RF energy and electromagnetic energy levels
and evaluation of such levels for exposure to humans:
KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r03, Evaluating Compliance with FCC
Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1–1992), IEEE Standard for Safety Levels
with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to
300 GHz.
• American National Standards Institute (C95.3–1992), IEEE Recommended Practice for
the Measurement of Potential y Hazardous Electromagnetic Fields— RF and Microwave.
To ensure that your exposure to RF electromagnetic energy is
within the FCC allowable limits for occupational use, always adhere
to the following
CAUTION guidelines:
• DO NOT operate the radio without a proper antenna attached, as
this may damage the radio and may also cause you to exceed FCC
RF exposure limits. A proper antenna is the antenna supplied with
and the ways to minimize such hazards. This radio is