Baofeng UV-82 Operating Manual page 13

-Press the 【F】button, to activate the FM Radio on; Press it again to deactivate the FM Radio.
-Press and hold on the 【F】button, to activate the alarm function; Press and hold it again, to
deactivate the alarm function.
­ SK­SIDE KEY2/【M】:
-Press the 【M】 button, to turn on the flashlight; Press it again to turn off. Press and hold on the 【M】
button, to monitor the signal.
-COPYING
Connecting the two radios with special data cable, press and hold
numerical key 2 or 3), then power on, you will see ' COPYING' on the LCD, that means data is
being copied from one radio to another.
­FUNCTION KEYPAD:
-【MENU】key:
-To enter the menu of the radio and confirm the setting.
- Press and hold 【MENU】 button, then power on, to switch the frequency mode and channel mode.
-【▲】【▼】key:
-Press and hold 【▲】or 【▼】key for frequency up or down fast.
-Press 【▲】or 【▼】key, the scanning will be opposite.
-【EXIT/AB】key:
-To cancel /clear or exit.
- While standby, press 【EXIT/AB】key to switch between Channel A and Channel B.
-Under FM radio mode, press【EXIT/AB】key to switch the FM radio band 65-75MHz/76-108MHz.
­NUMERIC KEYPAD:
‐Used to enter information for programming the radio's lists and the non‐standard CTCSS
‐Under transmission mode, press the numeric key to send the signal code( the code should be set by PC software).
­ACCESSORY JACK:
-The jack is used to connect audio accessories, or other accessories such as programming cable.
9.­'LCD' DISPLAY:
The display icons appear when certain operations or specific features are activated.
SK­SIDE KEY2/【M】
(or